Yekan YS/WK-142K Two-Wire Proximity Transmitter

در دسته بندی Vibration Displacement Sensors
مشاهده بیشتر
Product attributes:
  • Current output:

    4-20mA

  • Voltage output:

    7.87mV/μm

  • Power supply:

    +12 to +35 V DC

  • Country of manufacture:

    Iran

Short description:

The proximity transmitter Yekan YS/WK-142K is a two-wire device for measuring shaft vibration in industrial machinery. It is offered as a replacement option for certain Shinkawa WK-142K versions. Yekan specifies a 4–20 mA current output, a 7.87 mV/µm voltage output sensitivity, and a 12 to 35 V DC supply. Before ordering, match the probe, cable, and transmitter version to the existing system.

Yekan YS/WK-142K Two-Wire Proximity Transmitter

The Yekan YS/WK-142K is a two-wire proximity transmitter manufactured by Yekan for measuring shaft vibration and displacement in rotating machinery. It is offered as a replacement option for certain Shinkawa WK-142K transmitter configurations.

It processes the signal from a compatible proximity probe and extension cable and provides a 4–20mA current output for transmitting vibration measurements to control and monitoring equipment.

YS/WK-142K technical specifications

  • Device type: Two-wire proximity transmitter
  • Current output: 4–20mA
  • Voltage output sensitivity: 7.87 mV/µm, approximately 200 mV/mil
  • Power supply: 12 to 35 V DC, per Yekan’s specifications
  • Linear measurement range: 0.3 to 1.7 mm, per the specified configuration
  • Operating temperature: 0 to 70 °C
  • System length: 5, 7, or 9 m, depending on the order code
  • Country of manufacture: Iran

Features

  • Receives and processes signals from compatible proximity sensors
  • Standard current output for industrial control equipment
  • Can be used for radial shaft vibration monitoring
  • For vibration measurement on rotating machinery
  • Two-wire design carries power and signal in one current loop
  • Choose a model based on system length and the specifications of the component set

This transmitter belongs to the vibration displacement measurement equipment family.

Transmitter layout and connections

The technical drawing below shows the dimensions, sensor connections, BNC connector, and output terminals.

درایور (ترانسمیتر) پراکسیمیتی یکان جایگزین سری WK-142K شینکاوا Yekan 2-Wire Vibration Proximity Transmitter YSWK-142K

The YS/WK-142K operates as part of a system comprising a proximity probe, extension cable, and driver. The probe specifications, cable length, and transmitter settings must be compatible.

Industrial applications

The transmitter measures shaft vibration in rotating equipment such as industrial motors, fans, compressors, and machines with journal bearings.

Its 4–20 mA output can transmit measurements to a compatible PLC or other control and monitoring equipment.

Ordering code and model selection

The Yekan ordering code follows the format YS/WK-142K A-B. Select the version based on the combined probe and cable length, measurement range, and output specifications.

Yekan YS/WK-142K Two-Wire Proximity Transmitter

Compatibility and ordering

Before replacing a WK-142K with the YS/WK-142K, verify the complete part number, probe type, cable length, current output, supply voltage, and existing system settings.

Similar general specifications or connections alone do not establish that the transmitters are interchangeable.

For other equipment from the manufacturer, see the Yekan brand page.

The Yekan YS/WW-142K extension cable is a related product. Verify compatibility using the order code and specifications of the complete system.

  • Current output

    4-20mA

  • Voltage output

    7.87mV/μm

  • Power supply

    +12 to +35 V DC

  • Country of manufacture

    Iran

Yekan Company
Contact us