Vibration Displacement Sensors
Yekan YB/21747 Proximity Probe Extension Cable
Yekan YB/330930 Proximity Extension Cable for 3300 XL NSv
Yekan YB/330730 Proximity Extension Cable for 3300 XL 11 mm
Yekan YB/330130 Proximity Extension Cable for 3300 XL 5/8 mm
Yekan YS/WK-142K Two-Wire Proximity Transmitter
Yekan YS/WW-142K Proximity Extension Cable for Shinkawa WK-142K
Yekan YS/WL-142K05 Proximity Probe for Shinkawa WK-142K
Yekan YB/3300XL NSv Eddy-Current Proximity Probe
Yekan YB/3300XL 11 mm Eddy-Current Proximity Probe
Yekan YB/3300XL 8 mm Eddy-Current Proximity Probe
Yekan YB/3300 5 mm Eddy-Current Proximity Probe
Yekan YB/7200 5 mm and 8 mm Eddy-Current Proximity Probes
Yekan YB/3000 Proximity Probe for Bently Nevada 3000 and 7000 Series
Vibration displacement sensors measure relative shaft motion, displacement, axial position, and vibration in rotating machinery. They are important to condition monitoring and machinery protection in turbines, compressors, generators, large pumps, and other machines where shaft behavior matters.
A common example is the Proximity Probe, a non-contact sensor. These sensors typically use eddy-current technology to measure changes in the gap between the probe tip and the metal shaft. Applications include radial vibration, axial and shaft position, and some speed and phase-reference measurements. For a specific example, see the specifications and part numbers for Bently Nevada 30004.
A proximity measurement system generally consists of a probe, extension cable, and driver or Proximitor. These components must match in cable length, probe type, driver specifications, and measurement range. When replacing a component, verify its exact part number and specifications. Similar appearance alone does not establish compatibility.
Manufacturers such as Bently Nevada and Metrix supply proximity monitoring equipment for different operating conditions. Models can differ in probe diameter, cable length, linear measurement range, connector type, temperature limits, and output specifications. For an example of a Vibro-Meter displacement sensor, see Vibro-Meter TQ412.
Selecting a vibration displacement sensor depends on the machine, rotational speed, mounting location, expected displacement range, operating environment, and type of Vibration Monitoring system. Target surface quality, probe mounting distance, and gap adjustment can also affect measurement accuracy.
Browse vibration displacement sensors, proximity probes, Proximitor units, and related equipment by brand, model, and part number. When replacing equipment, verify the part numbers of the probe, extension cable, and driver as a matched set to confirm compatibility.