Yekan MS60 mechanical vibration switches help protect compressors, pumps, and cooling towers from excessive vibration.
The MS60 can be ordered using the part-number format MS60-ABC-DD. Four options let you configure the switch for your application.
1. Contact configuration. Choose SPDT or DPDT contacts.

2. Reset/startup delay coil voltage. Specify the coil voltage for the startup delay or remote reset function. The switch uses an electromagnet for this function.

3. Cable gland size. Select the cable gland size for the electrical connection.

4. Mounting hole pattern. Choose a pattern that matches the existing switch so the MS60 can be installed using the same bolt holes, without drilling or modifying the mounting structure.

Installation note. For best performance, mount the switch to the main body of the machine using four bolts.
The MS60 series is designed to withstand static and dynamic loads and is ATEX-approved for use in hazardous areas. The MS60 is straightforward to install and requires no special training. Yekan’s ISO/IEC 17025 calibration laboratory can set the trip point to suit the application. The switch provides continuous protection and requires annual calibration. Typical applications include rotating and reciprocating machinery, compressors, pumps, and cooling towers. The MS60 offers dependable performance, accurate operation, warranty coverage, and a cost-effective option for machinery protection. The figure below shows the MS60 mechanical vibration switch.


